Bidirectional Crowning Table

product categories

how can we help you?

If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

new products

Hinge Tools / bending tools

Advantages Production in two or three strokes Reducing of marks through spring loaded hold-down-device Active components are hardened High repeatability through integrated backgauge Functional test and adjustment through test bends - with your sample sheets Suitable For Material thickness up to 4,0 mm minimum inside Ø: 2,5 mm x material thickness for steel and aluminium 3,0 mm x material thickness for stainless steel
Press brake rolla-v dies without scratch

Press brake rolla-v dies without scratch, it's best to put the film on the workpiece surface when you bend. and we will recoomend the suitable roll-v die size for you according to the plate you bend.
Shim Style Adjustable Dies System/ bending tools

Shim Style Adjustable Dies Adjustable lower dies could be considered to be one of the most versatile additions to a press brake. With this type of tool, openings can be arranged from 6.35mm to 381mm. Spacers are provided to produce the required opening. Slotted spacers allow for easy removal to change the die opening. When not in use, spacers are positioned at sides of the die block. These dies can be furnished in solid lengths or sectioned for easier handling.
Amada Special Tools Press Brake Tool

The stright blade size:835*146*26mm,90degree. the material is 42CrMo4, hardness is HRC47+/-3
Amada bending thick board tool press brake tool

The stright blade size:835*175*40mm,60degree. the material is 42CrMo4, hardness is HRC47+/-3
42CrMo4 material press brake upper tools

The stright blade size:835*146*26mm,90degree. the material is 42CrMo4, hardness is HRC47+/-3
Amada Special Tools press brake tool

The Amada press brake tooling straight blade size:835*145*32mm,60degree. the material is 42CrMo4, hardness is HRC47+/-3
Press brake gooseneck upper tools

The gooseneck punch size:835*197*92mm,88degree. the material is 42CrMo4, hardness is HRC47+/-3. and height 197mm,width 92mm. can be made according to customer's request.
press brake T-V die tools with 30degree

The T-V die size:835*120*60mm,V12,30degree. the material is 42CrMo4, hardness is HRC52-58. and V6,V8,V10,V16,V20,V25 can be made according to customer's request.
press brake self centering 2v dies with standard punch

The self centering 2V dies, the size is 835*46*50mm,88degree,the weisght is 17kg.and we can make V5-V9,V8-V12,V12-V20,V16-V25 and other V opening according the bending thickness.